Double Cat5e jacks feature anti-tamper screw caps, which provide evidence of any unauthorised alteration with the jack - one of the main reasons for post-installation problems. Wire terminations are colour coded to T568B and the plates come with cable ties and fixing screws.
Austin Taylor Cat 5e Double Socket
Austin Taylor 2U 9-way recessed subracks allow the fitment of standard ten-pair IDC connection strips to any 19-inch rack.
Austin Taylor 2U 9-way Recessed Subrack
Austin Taylor 1U 3-way recessed subracks allow the fitment of standard ten-pair IDC connection strips to any 19-inch rack.
Austin Taylor 1U 3-way Recessed Subrack
Half sized blanking plate that fills unoccupied faceplate positions.
Austin Taylor Half-blanking Plate
Single-sized blanking plate that fills unoccupied faceplate positions.
Austin Taylor Single-blanking Plate
The Cable Management Panel neatly routes patch cords between patch panels. It provides four large capacity jumper rings in a compact 1U high panel. Comes with a fixing kit.
Austin Taylor 1U Cable Management Bar Front
Made in the popular 25x50 format and in tough ABS, these Cat 5e RJ45 modules just clip on to the faceplate.
Austin Taylor Cat 5e RJ45 Eurostyle Module
Made in the popular 25x50 format and in tough ABS, these Cat 5e RJ45 modules just clip on to the faceplate.
Austin Taylor Cat 5e RJ45 Module
Double gang faceplates support four modules, come complete with fixing screws and are compatible with standard backboxes.
Austin Taylor Quad Faceplate
This distribution frame for larger installations can be easily handled by one person and joined together to accommodate any size of installation. Supplied with two legs and a fixing/earthing kit.
Austin Taylor Frame 111B
This Austin Taylor linejack allows ISDN services to be easily extended over a structured cabling system or with point to point wiring. All products incorporate 100ohm resistors between contacts 4/5 and 3/6 to correctly terminate the ISDN bus. The termination resistors incorporated in the ISDN NT device must be switched out when using these products.
Austin Taylor ISDN LJ Single Outlet
Austin Taylor's ISDN adapter is for use with the standard Category 5 structured cabling system. The adapter plugs into a Category 5 linejack and accepts an RJ45 patch cord from the ISDN terminal adapter or terminal.
Austin Taylor ISDN Adapter
The Master adapter converts from an RJ45 outlet to a BT-style socket, allowing phones with BT-style plugs to be used on structured cabling systems.
Austin Taylor Full Master Adapter
The PBX Master voice adapter converts from an RJ45 outlet to a BT-style socket, allowing phones with BT-style plugs to be used on structured cabling systems.
Austin Taylor PBX Master Voice Adapter
Austin Taylor PBX Master voice modules are manufactured in 25x50 format from tough ABS
Austin Taylor PBX Master Module
Austin Taylor PSTN Master voice modules are manufactured in 25x50 format from tough ABS
Austin Taylor PSTN Master Module
Austin Taylor secondary voice modules are manufactured in 25x50 format from tough ABS
Austin Taylor BT-Style Secondary Module
The Austin Taylor MiniPatch system is designed for Small Office/Home Office (SOHO) installations and this termination panel enables it to be used for ISDN applications.
Austin Taylor ISDN Termination Patch Panel
The Austin Taylor Protector mount 5B plugs into 237A socket and holds the Surge Arrestor 14A.
Austin Taylor Surge Protector 5B1055 returned - Page 30 of 53
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53]